The articles included in this section have been peer reviewed and accepted by this journal and are published online after author approval. The only difference with a published article is that page numbers and publication issue have not yet been assigned.

• REVIEW

• Corrosion of titanium: Part 2: effects of surface treatments

  Davide Prando, Andrea Brenna, Maria Vittoria Diamanti, Silvia Beretta, Fabio Bolzoni, Marco Ormellese, MariaPia Pedeferri

  Post author correction

  DOI: 10.5301/jabfm.5000396

  Article Type: REVIEW

  OPEN ACCESS

• Additive manufacturing of titanium alloys in the biomedical field: processes, properties and applications

  Francesco Trevisan, Flaviana Calignano, Alberta Aversa, Giulio Marchese, Mariangela Lombardi, Sara Biamino, Daniele Ugues, Diego Manfredi

  Post author correction

  DOI: 10.5301/jabfm.5000371

  Article Type: REVIEW

• ORIGINAL RESEARCH ARTICLE

• Preparation and characterization of gelatin/sericin/carboxymethyl chitosan medical tissue glue

  Min Liang, Zhenzhu Li, Cengceng Gao, Fuping Wang, Zhongmin Chen

  Post author correction

  DOI: 10.5301/jabfm.5000384

  Article Type: ORIGINAL RESEARCH ARTICLE

• Monitoring the osseointegration process in porous Ti6Al4V implants produced by additive manufacturing: an experimental study in sheep

  Mehmet C. Kayacan, Yakup B. Baykal, Tamer Karaaslan, Koray Özsoy, İlker Alaca, Burhan Duman, Yunus E. Delikanlı

  Post author correction

  DOI: 10.5301/jabfm.5000385

  Article Type: ORIGINAL RESEARCH ARTICLE

• Printability of papers recycled from toner and inkjet-printed papers after deinking and recycling processes

  Arif Karademir, Cem Aydemir, Dogan Tutak, Raja Aravamuthan

  Post author correction

  DOI: 10.5301/jabfm.5000386

  Article Type: ORIGINAL RESEARCH ARTICLE

• Effects of quartz on crystallization behavior of mold fluxes and microstructural characteristics of flux film

  Liu Lei, Han Xiuli, Li Mingduo, Zhang Di

  Post author correction

  DOI: 10.5301/jabfm.5000382

  Article Type: ORIGINAL RESEARCH ARTICLE

• Assessment of corrosion resistance of cast cobalt- and nickel-chromium dental alloys in acidic environments

  Sven Mercieca, Malcolm Caligari Conti, Joseph Buhagiar, Josette Camilleri

  Post author correction

  DOI: 10.5301/jabfm.5000383

  Article Type: ORIGINAL RESEARCH ARTICLE

• Assessment of monomer release from 3 different fissure sealants

  K. Görkem Ulu Güzel, Işıl Sönmez

  Post author correction

  DOI: 10.5301/jabfm.5000380

  Article Type: ORIGINAL RESEARCH ARTICLE

• Hydroxyapatite decreases cytotoxicity of a glass ionomer cement by calcium fluoride uptake in vitro

  Casiano Del Angel-Mosqueda, Rene Hernandez-Delgadillo, Osvelia E. Rodríguez-Luis, María T. Ramírez-Rodríguez, Silvia Munguía-Moreno, Norma V. Zavala-Alonso, Juan M. Solís-Soto, María A. A. Nakagoshi-Cepeda, Rosa I. Sánchez-Nájera, Sergio E. Nakagoshi-Cepeda, Claudio Cabral-Romero

  Post author correction

  DOI: 10.5301/jabfm.5000381

  Article Type: ORIGINAL RESEARCH ARTICLE

• Effect of ZrB2 addition on the oxidation behavior of Si-SiC-ZrB2 composites exposed at 1500°C in air

  Claudio D’Amico, Giovanni Bianchi, Elisa Padovano, Sara Biamino, Alberta Aversa, Claudio Badini, Alberto Ortona

  Post author correction

  DOI: 10.5301/jabfm.5000379

  Article Type: ORIGINAL RESEARCH ARTICLE

• Potential of fish scales as a filling material in surface coating of cellulosic paper

  Elif Ural, Emine A. Kandirmaz

  Post author correction

  DOI: 10.5301/jabfm.5000378

  Article Type: ORIGINAL RESEARCH ARTICLE

• Comparison of 2 plating techniques for lateral clavicle fractures, using a new standardized biomechanical testing setup

  Cyrill Suter, Martin Majewski, Andrej M. Nowakowski

  Post author correction

  DOI: 10.5301/jabfm.5000377

  Article Type: ORIGINAL RESEARCH ARTICLE

• Double acid etching treatment of dental implants for enhanced biological properties

  Lluís Giner, Montse Mercadé, Sergi Torrent, Miquel Punset, Román A. Pérez, Luis M. Delgado, Francisco Javier Gil

  Post author correction

  DOI: 10.5301/jabfm.5000376

  Article Type: ORIGINAL RESEARCH ARTICLE

• Preparation, bioactivity and mechanism of nano-hydroxyapatite/sodium alginate/chitosan bone repair material

  Jianguo Liao, Yanqun Li, Haiyan Li, Jingxian Liu, Yufen Xie, Jianping Wang, Yongxiang Zhang

  Post author correction

  DOI: 10.5301/jabfm.5000372

  Article Type: ORIGINAL RESEARCH ARTICLE

• Biodegradable intramedullary nails reinforced with carbon and alginate fibers: in vitro and in vivo biocompatibility

  Anna Morawska-Chochół, Patrycja Domalik-Pyzik, Elżbieta Menaszek, Jacek Sterna, Wojciech Bielecki, Joanna Bonecka, Maciej Boguń, Jan Chłopek

  Post author correction

  DOI: 10.5301/jabfm.5000370

  Article Type: ORIGINAL RESEARCH ARTICLE